 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES * High current transfer ratio ( CTR : MIN. 1000% at IF = 1mA, VCE = 2V ) * High input-output isolation voltage ( Viso = 3,750Vrms ) * High collector-emitter voltage ( VCEO = 300V ) * Mini-flat package : 2.0mm profile : LTV-352T * UL approved ( No. E113898 ) * CUL approved ( No. E113898 , 01SC19287 ) * CSA approved ( No. 1243207 ) * FIMKO approved ( No. FI-16420 ) * NEMKO approved ( No. P01100403 ) * DEMKO approved ( No. 310475-01 ) * SEMKO approved ( No. 0109173 / 01-08 ) * VDE approved ( No. 094722 ) APPLICATIONS * Hybrid substrates that require high density mounting. * Telephone sets * Copiers, facsimiles * Interfaces with various power supply circuits, power distribution boards. Part No. : LTV-352T BNS-OD-C131/A4 Page : 1 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-352T : *1. 2-digit date code. *2. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *3. Rank shall be or shall not be marked. Part No. : LTV-352T BNS-OD-C131/A4 Page : 2 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12 0.3 ( .47 ) 4 0.1 ( .15 ) 5.5 0.1 ( .217 ) 2 0.1 ( .079 ) 8 0.1 ( .315 ) Part No. : LTV-352T BNS-OD-C131/A4 Page : 3 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25C ) PARAMETER Forward Current INPUT Reverse Voltage Power Dissipation Collector - Emitter Voltage Emitter - Collector Voltage OUTPUT Collector Current Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage Operating Temperature Storage Temperature *2 Soldering Temperature IC PC Ptot Viso Topr Tstg Tsol 150 150 170 3,750 -55 ~ +100 -55 ~ +150 260 mA mW mW Vrms C C C SYMBOL IF VR P VCEO VECO RATING 50 6 70 300 0.1 UNIT mA V mW V V *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-352T BNS-OD-C131/A4 Page : 4 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25C ) PARAMETER Forward Voltage INPUT Reverse Current Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current *1 Current Transfer Ratio Collector-Emitter Saturation Voltage Isolation Resistance Floating Capacitance Cut-Off Frequency Response Time (Rise) Response Time (Fall) SYMBOL MIN. TYP. MAX. UNIT VF IR Ct ICEO BVCEO -- -- -- -- 300 1.2 -- 30 -- -- 1.4 10 250 200 -- V A pF nA V CONDITIONS IF=10mA VR=4V V=0, f=1KHz VCE=200V, IF=0 IC=0.1mA IF=0 IE=10A IF=0 IF=1mA VCE=2V IF=20mA IC=100mA DC500V 40 ~ 60% R.H. V=0, f=1MHz VCE=2V, IC=20mA RL=100, -3dB VCC=2V, IC=20mA RL=100 OUTPUT BVECO IC CTR VCE(sat) 0.1 10 1,000 -- -- -- -- -- -- -- -- 1.2 V mA % V pF kHz s s TRANSFER CHARACTERISTICS Riso Cf fc tr tf 5x1010 1x1011 -- 1 -- -- 0.6 7 100 20 -- 1 -- 300 100 *1 CTR = IC x 100% IF Part No. : LTV-352T BNS-OD-C131/A4 Page : 5 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature 60 Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) 200 Forward current IF(mA) 50 40 30 20 10 0 -55 150 100 50 0 25 50 75 100 o 125 0 -55 0 25 50 75 100 o 125 Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.3 Collector-emitter saturation Voltage vs. Forward current Collector-emitter saturation voltage VCE(sat) (V) Fig.4 Forward Current vs. Forward Voltage 100 o 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 1 2 Forward current (mA) Ic= 5mA 10mA 30mA 50mA 70mA 100mA 100 C 80 C 60 C 10 o o 40 C 20 C o o 1 3 4 5 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 Forward current IF(mA) Forward voltage (V) Fig.5 Current Transfer Ratio vs. Forward Current 7000 VCE= 2V Current transfer ratio CTR (%) Fig.6 Collector Current vs. Collector-emitter Voltage 100 Collector current Ic (mA) 6000 5000 4000 3000 2000 1000 0 0.1 1 Forward current (mA) 10 10mA 5mA 80 3mA 2.5mA 60 40 20 2mA 1.5mA 1.5mA 1mA PC (MAX.) IF= 0.5mA 0 0 1 2 3 4 5 Collector-emitter voltage VCE(V) Part No. : LTV-352T BNS-OD-C131/A4 Page : 6 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 1.2 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage VCE (sat) (V) 1.2 Relative current transfer ratio (%) 1.0 0.8 0.6 0.4 0.2 0 20 40 60 IF= 1mA VCE= 2V IF= 20mA IC= 100mA 1.0 0.8 0.6 0.4 0.2 80 O 100 20 40 60 80 O 100 Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Temperature 1000 Fig.10 Response Time vs. Load Resistance 1000 500 Collector dark current ICEO (nA) VCE= 200V Response time ( s) 200 100 50 20 10 5 2 VCE= 2V IC= 20mA Ta= 25 C O tr 100 tf 10 td ts 1 20 40 60 80 O 100 1 0.1 1 10 Ambient temperature Ta ( C) Load resistance RL (k ) Fig.11 Frequency Response Test Circuit for Response Time Input Output Output td tr ts tf 0 Voltage gain Av (dB) -5 -10 -15 VCE= 2V IC= 20mA Ta= 25 C O Vcc Input RD RL 10% 90% RL= 1k -20 -25 0.1 1 100 10 Test Circuit for Frequency Response Vcc RD RL Output 10 100 500 Frequency f (kHz) Part No. : LTV-352T BNS-OD-C131/A4 Page : 7 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Temperature Profile of Soldering Reflow (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. 30 seconds 230 C 200 C 180 C 1 minute 25 C 2 minutes 1.5 minutes 1 minute (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-352T BNS-OD-C131/A4 Page : 8 of 8 |
Price & Availability of LTV-352T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |